Twin Wall

Terminals

Pitched or Flat Roof Flashing

Article Code: 45.I.25

Print

The Stainless Steel Roof Flashing is an accessory placed on the terminal section of a Flue or a Chimney System.  Its function is to prevent the entry of rainwater.

Materials used: Stainless Steel 304 BA (EN 1.4301 – L20), Stainless Steel 316 BA (EN 1.4404 – L50).

Thickness: 0.6 mm in 304 AISI (EN 1.4301), only 0.5 mm in 316 AISI (EN 1.4404).

It is composed of a base whose size varies depending on the diameter chosen, with an opening in the center with a cone,positioned at an angle relative to the base, that allows for the passage of the flue; it comes supplied, as standard, with a storm collar that is placed around the outside of the System, whose function is to keep the water off the cone.

Its use is intended at the point where the system intersects the roof, it therefore is a junction between the roof of the building and the Chimney System. 

The pitched flashing, is made, as standard, adaptable to any roof pitch from 5° to 30°. 

Listino non presente
DeDiAB
13080450135
150100650155
180130650185
200150650205
230180650235
250200700255
300250700305
350300800355
400350800405
450400850455

The technical data on the website are subject to change without notice.

Twin Wall

Related products