Twin Wall

Inner Wall: Stainless Steel 316L BA (EN 1.4404 - L50) thickness 0.5 mm

Outer Wall: Stainless Steel 304 BA (EN 1.4301 - L20) thickness 0.5 mm or 0.6 mm thick Copper.

Cap and Fixture Inside: Stainless Steel 304 BA (EN 1.4301 - L20), respectively, in thicknesses of 0.5 mm and 1.5 mm.

Welding: longitudinal TIG process for the fusion of adjoining pieces, without filler.

Belling: cold moulding, done with a mould and counter mould hydraulic expansion system ensuring calibrated joints with a tolerance of +/- 2mm.

Accessories: triple lip silicone gasket to ensure the joint is sealed; locking band to secure the joint and ensure the continuity of the system.

Evacuation of the products of combustion resulting from wood-burning, multi-fuel, natural gas and diesel appliances. Especially indicated in fairly or very windy areas.

For the designation of the chimney system according to UNI EN 1856-1 the following is allowed:

operation:
- Dry (D)
- Wet (W)

pressures:
- Positive (P1 = 200 Pa)
- Negative (N1 = 40 Pa).

Operating temperatures:

- ≤ 200 ° C with silicone gasket and P1 = 200 P; ≤ 600 ° C without silicone gasket and N1 = 40 Pa

The technical data on the website are subject to change without notice.