Single Wall

Materials Used: Stainless Steel 304 BA (EN 1.4301 - L20), Stainless Steel 316 BA (EN 1.4404 - L50)

Thicknesses: 0.5mm and 0.6mm for 304 AISI (EN 1.4301), only 0.5mm for 316 AISI (EN 1.4404).

Belling: done with a mould and countermould hydraulic expansion system that ensures calibrated joints with a tollerance of +/- 2mm.

Welding: longitudinal TIG process for the fusione of adjoining pieces, for ensuring the seal of every single component.

Accessories: triple lip silicone gasket, to ensure the joint is sealed; locking bands to secure the joint and ensure the continuity of the system.

Among the products offered we also make flues in Stainless Steel 304 BA 0.8 mm thick, not intended for the construction of Chimney Flue Systems in accordance with the requirements of UNI EN 1856-1.

In such cases, the forms are made with vertical edge forming machines. The female form is nominal internal diameter, the male form is tapered. Such features, not allowing the use of gaskets and locking bands, do not ensure the seal of the system.

Dispersal of products resulting from the combustion processes (Gases, Smoke) of natural gas, oil, wood and from ventilation (Air).

Operation: dry (D) or wet (W)

Pressure: Positive for P1 = 200 Pa; Negative for N1 = 40 Pa.

Working Temperature: Max 200°c with silicone gasket and P1 200 Pa; Max 600°c without silicone gasket and N1 40 Pa.

The technical data on the website are subject to change without notice.