Single Wall

Materials Used: Stainless Steel 304 BA (EN 1.4301 - L20), Stainless Steel 316 BA (EN 1.4404 - L50)

Thickness: 2.0mm for the plate; 0.6mm for the joint.

Belling: done with a mould and counter mould hydraulic expansion system ensuring calibrated joints with a tolerance of +/- 2mm.

Its use is intended at the base of a Chimney Flue System. It comes equipped with a threaded 3/4 Gas joint for condensate draining. The distance of the system relative to the wall is a variable distance of 50/80 mm or 50/100 mm, depending on the chosen diameter.

Welding: longitudinal TIG process for the fusion of adjoining pieces to ensure the seal of each individual component.

Accessories: triple lip silicone gasket to ensure the joint is sealed; locking band to secure the joint and ensure the continuity of the system.

Nuts and bolts for the wall support side plates are not included.

Dispersal of products resulting from combustion processes (Gases, Smoke) of natural gas, oil, wood and from ventilation (Air).

Operation: dry (D) or wet (W)

Pressure: Positive for P1 = 200 Pa; Negative for N1 = 40 Pa.

Working Temperature: Max 200°c with silicone gasket and P1 200 Pa; Max 600°c without silicone gasket and N1 40 Pa.

The technical data on the website are subject to change without notice.